| MSH1 Bicycle Works ® |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| Products |
S&S Original Style Hardcase (gray)
Features and benefits:
- Time proven rugged design.
- Rarely does any damage happen to these cases.
- The shell is made from silver-gray high density polyethylene which is
extremely tough. - Industrial style handles and hardware for strength and durability.
- Two locking metal latches.
- Padlock tabs so a regular padlock can be used in addition to the
locking latches for added security. - Heavy duty recessed ball bearing wheels
- Spring loaded steel flip out handle for pulling the case.
- Molded in feet so they can't be broken off and they are farther apart for
added stability. - Replacement latches and hardware available in the event that
something does get damaged. - Available in 10, 12 and 14" sizes (at extra cost).
- No liner so it can easily be washed out.
- Made in America.
10" Edge Pull
Original style hardcase (gray)
Case dimensions are 26" x 26" x 10" which meets the typical airline standard
maximum size limit of 62" linear inches combined (length + width +
thickness). The standard case has an improved wheel configuration that
greatly improves the stability of the case when it's being pulled.
- Approximate retail price $430.00
- Approximate weight is 17 pounds
Flip out handle and 2 wheels on the narrow side.
$425.00
$385 (MSH1 Frame clients only)
10" Side pull / edge pull (4 wheel)
Original style hard case (gray)
This 4 wheel case can be pulled on its narrow or wide edge. It has 2 wheels
located on the wide edge of the case so it's very stable when being pulled over
rough terrain and 2 wheels on the narrow edge so it's maneuverable in tight
places. When being pulled on the wide edge, it's pulled by the all black carry
handle instead of the telescopic handle found on our side pull case below.
Case dimensions are 26" x 26" x 10" (click here for a dimensioned drawing of
the case interior) which meets the typical airline standard maximum size limit
of 62" combined (length + width + thickness). It has the improved wheel
configuration on the narrow edge which greatly improves the stability of the
case.
- Approximate retail price is $465.00
- Approximate weight is 17.5 pounds
Call to order or check availability
10" Side pull with telescopic handle,
Original style hard case (gray)
This case has 4 wheels located on the wide edge of the case so it's very
stable when being pulled on uneven terrain or sloping surfaces. We also
added a telescopic pull handle which provides extra clearance between your
feet and the case. The ribs on one face were added to protect the center
section that houses the pull handle. Although the basic case is 26"x26"x10",
the same inside dimensions as our 10" case, the ribs add another inch to the
10" height of the case for an over the ribs dimension of 11". Technically this
case is oversize so you may get charged for it however some airlines ignore
feet and ribs when measuring so they accept it without an extra charge. The
same 10 inch compression members that are used with our standard case
work with this case.
- Approximate weight is 18.3 pounds
- Approximate retail price is $572.00
Call to order or check availability
MSH1 Recommended Hardcase Accessory Kit
- Three (3) compression members
- 5.5" tube pad set, full length velcro closure, 10 feet long, cut to fit
- 7.5" tube pad set, full length velcro closure, 10 feet long, cut to fit
$85.00
| © 2012 MSH1 Bicycle Works ® |
